레벨링 머신의 기능은 무엇입니까?

The plate leveling machine is mainly used to straighten plates of various specifications plates. It is suitable for the leveling work of various cold and hot rolled plates. Next, we Xinlijin will take this chance to introduce you what are the functions of the plate leveling machine.

•  Improve the quality of sheet metal

The plate leveling machine is a precision machine used to improve the shortcomings of coils and plates. These disadvantages include coil set, crossbow, twist, edge camber, wavy edges, coil cracks, and center bumps. If we use a plate leveling machine, these shortcomings can be well solved, so that the quality of the entire metal plate is improved.

Ø Remove stress from the material

The reason why plate leveling machine can remove the internal stress in the materials is because the leveling technology can selectively extend each part of the material. In order to obtain a common fiber length, the shorter part of the sheet fiber is proportionally elongated below the material yield point.

Its realization is to make the material circulate up and down with a small radius of curvature when passing through the plate leveling machine tool, so that the shorter material fiber is elongated. When the sheet metal moves towards the outlet of the leveling machine, the undulations of the upper and lower zigzags gradually decrease to eliminate the material deformation caused by the violent bending at the leveling entrance of the machine tool.

• Adaptable to high-strength materials

Because of the increasing use of high tensile strength materials in the metal sheet metal industry, the plate leveling of the material requires a large leveling pressure. During the leveling process, the higher leveling pressure will inevitably have an impact on the machine structure and the leveling roll. The equipment is very important for the improvement of the quality of the leveling and the life of the machine.