OUR PRODUCTS

Sheet Metal Leveling Machine To Straighten Various Metal Plates & Improve The Flatness Of Sheet Metal

INDUSTRY APPLICATION

leveling comparison for different kinds of plates

This is to show the flatness improvement of work-piece after leveled by the precision roller leveler machine.
INDUSTRY APPLICATION

leveling comparison for different kinds of plates

This is to show the flatness improvement of work-piece after leveled by the precision roller leveler machine.
INDUSTRY APPLICATION

leveling comparison for different kinds of plates

This is to show the flatness improvement of work-piece after leveled by the precision roller leveler machine.
INDUSTRY APPLICATION

leveling comparison for different kinds of plates

This is to show the flatness improvement of work-piece after leveled by the precision roller leveler machine.
INDUSTRY APPLICATION

leveling comparison for different kinds of plates

This is to show the flatness improvement of work-piece after leveled by the precision roller leveler machine.This is to show the flatness improvement of work-piece after leveled by the precision roller leveler machine.

OUR SERVICE

Sheet Metal Leveling Machine To Straighten Various Metal Plates & Improve The Flatness Of Sheet Metal

Ngành công nghiệp tấm lưới là một khái niệm rộng, có thể được sử dụng làm tấm trang trí trong ngành xây dựng, được sử dụng làm bộ phận bảo vệ của thiết bị cơ khí, được sử dụng làm linh kiện thủ công mỹ nghệ, v.v. Bởi vì các bước xử lý và tính năng sản phẩm riêng. Theo các loại vật liệu khác nhau, hình dạng lưới khác nhau và kích thước cạnh khác nhau, v.v. Các sản phẩm tấm lưới sẽ có mức độ biến dạng khác nhau. Vì vậy, máy san lấp mặt bằng chính xác có cơ hội được sử dụng rộng rãi trong ngành công nghiệp này, hình ảnh sau đây là so sánh cho tấm lưới trước và sau khi làm phẳng.

 

 

Trong gia công kim loại tấm, các sản phẩm cắt và dập laser là quá trình không thể thiếu, để phục vụ tốt hơn cho quy trình tiếp theo, san lấp mặt bằng chính xác đã trở thành quá trình nâng cao chất lượng sản phẩm trong mỗi nhà máy sản xuất kim loại tấm.

Trong ngành công nghiệp chính xác, các nhà sản xuất có yêu cầu cao đối với nguyên liệu kim loại tấm, thường cần các tấm có độ phẳng cao, điều này làm cho nó trở thành một liên kết cần thiết cho các nhà bán lẻ tấm để làm phẳng vật liệu bằng máy san lấp mặt bằng chính xác trước khi bán.

Ngành công nghiệp ô tô

Trong ngành công nghiệp chính xác, các nhà sản xuất có yêu cầu cao đối với nguyên liệu kim loại tấm, thường cần các tấm có độ phẳng cao, điều này làm cho nó trở thành một liên kết cần thiết cho các nhà bán lẻ tấm để làm phẳng vật liệu bằng máy san lấp mặt bằng chính xác trước khi bán.

Ngành công nghiệp tấm lưới là một khái niệm rộng, có thể được sử dụng làm tấm trang trí trong ngành xây dựng, được sử dụng làm bộ phận bảo vệ của thiết bị cơ khí, được sử dụng làm linh kiện thủ công mỹ nghệ, v.v. Bởi vì các bước xử lý và tính năng sản phẩm riêng. Theo các loại vật liệu khác nhau, hình dạng lưới khác nhau và kích thước cạnh khác nhau, v.v. Các sản phẩm tấm lưới sẽ có mức độ biến dạng khác nhau. Vì vậy, máy san lấp mặt bằng chính xác có cơ hội được sử dụng rộng rãi trong ngành công nghiệp này, hình ảnh sau đây là so sánh cho tấm lưới trước và sau khi làm phẳng.

 

 

WHO ARE WE

Guangdong Xinlijin Intelligent Equipment Co., Ltd. We are a premier leveling machine manufacturer which is located in Dongguan City, Guangdong Province, China. We specialize in sheet metal roller leveler machines including R&D, manufacturing and selling, our professional capabilities have enabled us to gain more and more customers in the domestic and international markets. We delight our customers on the promise to never compromise quality over price. Customers value our teamwork, expertise and passion for helping them succeed now and into the future.

Where is it applied & How does it work
Precision leveling machine is designed for the products with high flatness requirements. It is widely used in industrial field of mesh plate, metal sheet perforating, laser cut metal sheet, stamping metal plate, accessories for the electronics industry etc. It is suitable for different metal materials, different material widths & thickness ranges. In the leveling process, the sheet metal part goes through a series of alternating bends which we called “Bauschinger effect”. The material is processing in such a way that the final result is flat and internal stress released, then the work-piece is in good condition that ready for the subsequent production steps such as welding, bending or folding etc.

WHY CHOOSE US

We focus on R&D, manufacturing and sales of sheet metal rolling machines, and our professional capabilities have enabled us to win more and more customers in domestic and international markets.

Our R&D and engineering team has more than 20 years of experience in the sheet metal industry. We can provide the best solution for customers.
We will respond to order inquiries within 24 hours.
We will have stock availability of most of standard models and keep some stock for critical components for providing a quick delivery date for any new orders for both standard one and customized one.
Our intension is to add value to all customers and metal industrial continuously.
  • Experienced R&D And Engineering Team
    Our R&D and engineering team has more than 20 years of experience in the sheet metal industry. We can provide the best solution for customers.
  • Professional Service Team
    We will respond to order inquiries within 24 hours.
  • A Quick Delivery
    We will have stock availability of most of standard models and keep some stock for critical components for providing a quick delivery date for any new orders for both standard one and customized one.
  • Our Purpose
    Our intension is to add value to all customers and metal industrial continuously.

OUR NEWS

This is our newsletter
Apr 13,2023
Các chức năng của máy san lấp mặt bằng là gì?

The plate leveling machine is mainly used to straighten plates of various specifications plates. It is suitable for the leveling work of various cold and hot rolled plates. Next, we Xinlijin will take this chance to introduce you what are the functions of the plate leveling machine.

What'S Difference Between 4-High Leveler Machine And 6 High Leveler Machine?

 

 

  •  Improve the quality of sheet metal

 

The plate leveling machine is a precision machine used to improve the shortcomings of coils and plates. These disadvantages include coil set, crossbow, twist, edge camber, wavy edges, coil cracks, and center bumps. If we use a plate leveling machine, these shortcomings can be well solved, so that the quality of the entire metal plate is improved.

 

Ø Remove stress from the material

The reason why plate leveling machine can remove the internal stress in the materials is because the leveling technology can selectively extend each part of the material. In order to obtain a common fiber length, the shorter part of the sheet fiber is proportionally elongated below the material yield point.

 

Its realization is to make the material circulate up and down with a small radius of curvature when passing through the plate leveling machine tool, so that the shorter material fiber is elongated. When the sheet metal moves towards the outlet of the leveling machine, the undulations of the upper and lower zigzags gradually decrease to eliminate the material deformation caused by the violent bending at the leveling entrance of the machine tool.

 

  • Adaptable to high-strength materials

 

Because of the increasing use of high tensile strength materials in the metal sheet metal industry, the plate leveling of the material requires a large leveling pressure. During the leveling process, the higher leveling pressure will inevitably have an impact on the machine structure and the leveling roll. The equipment is very important for the improvement of the quality of the leveling and the life of the machine.

Apr 13,2023
Hai cấu trúc của máy cân bằng chính xác

Precision leveling machine is composed of different structures, each component plays a different role. Below, Xinlijin Technology will introduce you the two structures of the precision leveling machine, which are the frame part and the roller part.

 

1. Frame part: The frame is the main body of the precision leveling machine, which is composed of a base, column and connecting beam, and is connected by 4 tensioning bolts to form a closed frame structure. The frame is a welded structure, which is annealed after welding to eliminate internal stress. The frame has sufficient strength and rigidity to ensure a small elastic deflection under heavy loads to meet the leveling needs of the metal plates.

Two Structure Of Precision Leveler Machine

2.Roll part: The roller part is the working part of the precision leveling machine, including the working roller and the supporting roller. The working roller material is 60CrMoV, the hardness of quenching and tempering treatment is HB286~HB321, the surface quenching hardness is HRC56~HRC63, the depth of the hardened layer is 6mm~10mm, the roughness is 0.8μm, and the dimensional tolerance reaches h6. In order to meet the stiffness requirements of the working roller, 3 rows of upper and lower support rollers are specially set up.

 

Two Structure Of Precision Leveler Machine

Apr 22,2023
Sự khác biệt giữa máy 4 cấp cao và 6 máy cấp cao là gì?

The quadruple high-precision leveling machine adopts a support roller between the upper and lower row leveling work rollers and the support bearings (wheels) for forming a four-fold group roller structure with each two levels upper and lower.

 

What's difference between 4-high leveler machine and 6 high leveler machine?

The six-high roller leveling machine is six-fold group roller structure with each three levels upper and lower.  Compared to four-fold leveling machine, what the increased layer is middle roller layer which set between support roller layer and leveling roller layer.


Advantages of such kind of roller levelers have pressure balance on leveling rollers, good structural rigidity, small flexural deflection on working rollers.

Thus we won’t worry about his leveling performance. Some issue maybe being occurred in normal leveling machine, like press dents, work-piece collapse, and sickle bending have been solved well.

 

 

Apr 13,2023
Hai cấu trúc của máy cân bằng chính xác

Precision leveling machine is composed of different structures, each component plays a different role. Below, Xinlijin Technology will introduce you the two structures of the precision leveling machine, which are the frame part and the roller part.

 

1. Frame part: The frame is the main body of the precision leveling machine, which is composed of a base, column and connecting beam, and is connected by 4 tensioning bolts to form a closed frame structure. The frame is a welded structure, which is annealed after welding to eliminate internal stress. The frame has sufficient strength and rigidity to ensure a small elastic deflection under heavy loads to meet the leveling needs of the metal plates.

Two Structure Of Precision Leveler Machine

2.Roll part: The roller part is the working part of the precision leveling machine, including the working roller and the supporting roller. The working roller material is 60CrMoV, the hardness of quenching and tempering treatment is HB286~HB321, the surface quenching hardness is HRC56~HRC63, the depth of the hardened layer is 6mm~10mm, the roughness is 0.8μm, and the dimensional tolerance reaches h6. In order to meet the stiffness requirements of the working roller, 3 rows of upper and lower support rollers are specially set up.

 

Two Structure Of Precision Leveler Machine

Apr 22,2023
Sự khác biệt giữa máy 4 cấp cao và 6 máy cấp cao là gì?

The quadruple high-precision leveling machine adopts a support roller between the upper and lower row leveling work rollers and the support bearings (wheels) for forming a four-fold group roller structure with each two levels upper and lower.

 

What's difference between 4-high leveler machine and 6 high leveler machine?

The six-high roller leveling machine is six-fold group roller structure with each three levels upper and lower.  Compared to four-fold leveling machine, what the increased layer is middle roller layer which set between support roller layer and leveling roller layer.


Advantages of such kind of roller levelers have pressure balance on leveling rollers, good structural rigidity, small flexural deflection on working rollers.

Thus we won’t worry about his leveling performance. Some issue maybe being occurred in normal leveling machine, like press dents, work-piece collapse, and sickle bending have been solved well.

 

 

Apr 13,2023
Các chức năng của máy san lấp mặt bằng là gì?

The plate leveling machine is mainly used to straighten plates of various specifications plates. It is suitable for the leveling work of various cold and hot rolled plates. Next, we Xinlijin will take this chance to introduce you what are the functions of the plate leveling machine.

What'S Difference Between 4-High Leveler Machine And 6 High Leveler Machine?

 

 

  •  Improve the quality of sheet metal

 

The plate leveling machine is a precision machine used to improve the shortcomings of coils and plates. These disadvantages include coil set, crossbow, twist, edge camber, wavy edges, coil cracks, and center bumps. If we use a plate leveling machine, these shortcomings can be well solved, so that the quality of the entire metal plate is improved.

 

Ø Remove stress from the material

The reason why plate leveling machine can remove the internal stress in the materials is because the leveling technology can selectively extend each part of the material. In order to obtain a common fiber length, the shorter part of the sheet fiber is proportionally elongated below the material yield point.

 

Its realization is to make the material circulate up and down with a small radius of curvature when passing through the plate leveling machine tool, so that the shorter material fiber is elongated. When the sheet metal moves towards the outlet of the leveling machine, the undulations of the upper and lower zigzags gradually decrease to eliminate the material deformation caused by the violent bending at the leveling entrance of the machine tool.

 

  • Adaptable to high-strength materials

 

Because of the increasing use of high tensile strength materials in the metal sheet metal industry, the plate leveling of the material requires a large leveling pressure. During the leveling process, the higher leveling pressure will inevitably have an impact on the machine structure and the leveling roll. The equipment is very important for the improvement of the quality of the leveling and the life of the machine.

Jun 18,2025
Boost Metal Processing Efficiency with the NCLT50-1000 3-in-1 Feeder Machine



In today's competitive metalworking industry, manufacturers need compact, efficient, and automated feeding systems that minimize downtime and maximize productivity. The
NCLT50-1000 3-in-1 Feeder Machine is a cutting-edge solution engineered to meet these demands. Designed for high-performance sheet metal operations, this advanced feeder integrates uncoiling, leveling, and feeding into one robust system—simplifying workflow while improving accuracy and speed.

What Is a 3-in-1 Feeder Machine?

A 3-in-1 Feeder Machine combines three essential sheet metal processing functions:

  1. Uncoiler – unwinds metal coils with precise control,

  2. Straightener (Leveler) – removes internal stress and flattens the material,

  3. Feeder – delivers the sheet to the press or processing machine with exact positioning.

By integrating these into a single machine, the NCLT50-1000 reduces floor space, cuts setup time, and ensures synchronized performance for fast-paced production lines.

Technical Features of NCLT50-1000

This model is optimized for mid-to-heavy sheet metal applications with the following key specifications:

  • Material Thickness: 0.3mm to 2.0mm

  • Material Width: 100mm to 1000mm

  • Material Weight: Up to 7000 KG

  • Material Inner Diameter: 508mm

  • Material Outer Diameter: 800mm–1400mm

  • Feeding Speed: 35–40 meters per minute

  • Power Supply: AC380V ±10%, 60HZ ±2%, three-phase five-wire

  • Release Date: June 15, 2025

These capabilities make the NCLT50-1000 ideal for handling a wide variety of metals such as cold-rolled steel, aluminum, and copper sheets used in automotive, appliance, and precision stamping industries.

Why Choose the NCLT50-1000 3-in-1 Feeder Machine?

  • Compact and Integrated Design Streamlines production space by replacing three separate machines with one all-in-one unit.

  • Improved Leveling Accuracy Reduces material defects and ensures consistent output, even at high speed.

  • Heavy Load Capacity Supports coils up to 7000 KG, making it ideal for large-scale operations.

  • Fast Setup and Automation Minimize manual adjustments with PLC controls and user-friendly interfaces.

  • Energy Efficient & Safe Built to international electrical standards with energy-saving configurations.

Trusted Manufacturer – Dongguan Xin Lijin Technology Co., Ltd.

The NCLT50-1000 is produced by Dongguan Xin Lijin Technology Co., Ltd., a trusted name in the leveling and feeding machine industry. Known for precision engineering and quality assurance, Xin Lijin serves both domestic and international clients in sheet metal and industrial automation sectors.

By investing in a reliable 3-in-1 Feeder Machine like the NCLT50-1000, you position your production line for long-term growth, reduced maintenance, and higher ROI.